Expert Answers about Prime Time Crusader Fifth Wheel

Where is the Pairing Button for the Furrion Vision S Wireless RV Backup Camera System # FOS43TASF
The pairing button for the Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 4.3" Screen # FOS43TASF is on the bottom of the camera, under where the LED lights are. I have attached a photo for you to see.
view full answer...

Why Does Correct Track System Have Twice as Many Alignment Brackets
According to my research there are "A" and "B" brackets for the Correct Track system, like part # RR23QX for the tandem setup. Since you could potentially use all "A" or all "B" brackets they give you enough for any given scenario. It can be a bit confusing but they tried to make sure you have everything you need to get your trailer aligned properly.
view full answer...

Are Hanger Spacers Needed for 3rd Generation Correct Track on Tandem Axle Trailer
I definitely see what you're saying about the spacer, found as part # LC34UD, from the 2nd gen Correct Track LC407131. With that being said, the Correct Track Trailer Alignment and Lift Kit # RR23QX has been safety tested and works just fine without that spacer. As long as you install the Correct Track according to the instructions you will be just fine. If you really want those spacers in-between the hangers on your trailer then you can order some from the part above and install them...
view full answer...

Is The Lippert Electric Stabilizer # LC298707 A Compatible Replacement For The # 198641
The Lippert High-Speed Power Stabilizer Jack # LC298707 would be a great replacement option for your Lippert 198641 stabilizer jack. The motor # LC352338 for the # LC298707 hasn't been tested with the 198641 so it's not confirmed to fit.
view full answer...

How To Add Lights to an RV Awning on a Coach
I do have some options for you to add lights to your awning. If you have a Lippert Solera Awning then there may be a light track on the coach under the awning and in which case you would just use the LED Fabric Light Kit like part # LC674282 and slide it into the track. If you don't have the built-in track or another brand of awning then you can use a simple peel and stick light like the LED Light Strip for Solera RV Awnings part # LC423331 which can be wired to a switch of your choosing.
view full answer...

What is the Rear Bumper Capacity of a 5th Wheel Trailer and How To Increase It
In order to determine the capacity of the rear bumper on any fifth wheel trailer you'll need to reach out to the trailer manufacturer as we don't have this information. That said, it's typically around the 200 lb mark. If you need/want more we do have a way to strengthen the rear bumper using the Mount-n-Lock SafetyStruts Universal RV Bumper Support Brackets part # MO34VR which increases the capacity to 400 lbs. In order to carry cargo and gear on the bumper, I highly recommend the etrailer...
view full answer...

Availability Of Replacement Face For Control Panel For Lippert Ground Control 3.0
I have complete replacement option for you, but unfortunately the face of the control panel for your Lippert Ground Control 3.0 and Travel Trailer RV Leveling System is not available separately and you will need to replace the entire control panel. The correct replacement control panel is the # LC421484 you were looking at. I included a video of the # LC421484 for you to take a look at.
view full answer...

Solution for Replacing Connexx Soundbar in RV
We aren't able to source the sound bar you are looking for but it looks like it may be discontinued so you'd need to go with a different solution like the Furrion part # FSB2N25MCBL that you referenced. The wiring colors won't be an exact match but they are all individually labeled on the Furrion which would make it a little easier.
view full answer...

Slide Toppers For a 2016 Prime Time Crusader 322RES 5TH Wheel Camper
First you will need to decide if you want the slide toppers in a white or black. Also you will need to ensure you have at least 6" of clearance nest to each side of the slide for the topper to fit properly. If you do not have the minimum clearance next to a slide please let me know which topper doesn't so I can help you find the proper size so you do not have any clearance issues. White 1. # LCV000163301 2. # LCV000163285 3. # LCV000163307 Black 1. # LCV000168110 2. # LCV000168105 3....
view full answer...

Replacement Light Needed Gustafson RV Pendant Light
The Gustafson RV Sidewall Light w/ Button, # 277-000443 you refer to can only be purchased as a complete component, our supplier does not offer separate shades as an option. We do have several options of pendent lights available, please note the attached link. One very nice option is the Gustafson RV Pendant Light - Ceiling Mount - Satin Nickel - White Glass, # 277-000416. This is a steel construction with satin nickel finish and LED bulbs. The overall dimensions are 4-3/4" wide x 14-1/8 tall.
view full answer...

Troubleshooting Slack in Performance for Demco Hijacker Autoslide
If you have been upkeeping with the care and maintenance on your 18K Demco Hijacker Autoslide # DM8550034 it sounds like you might need to mess with the gear adjustment bolt located on the cab-end of the Hijacker. To do this you need to place the hitch in a parallel position with the truck and then use a 1-1/8" wrench to loosen the nut and then tighten it until it stops against the gear. Then simply back the bolt off 1/8 turn and retighten the jam nut to keep everything secure. I'm attaching...
view full answer...

Lift Kit for Crusader 28RL Fifth Wheel Camper
For a tandem axle trailer like your Crusader Fifth wheel 28RL we have the Correct Track Tandem Axle lift kit part # RR23QX which will give you a lift of 2-1/4 inches and would help level your trailer like you are wanting. A lift like this is realistically only option you'd have since your springs are mounted above the axle already.
view full answer...

Replacing A Dometic RV Air Conditioner Rooftop Unit With An Advent Air Unit
If you're replacing just the rooftop unit of your Dometic system with the Advent Air # ACM135 then it's a super easy swap out. You'll just need to trace the wire harness of the old rooftop unit to the controller. It's going to have a 6-pin or 9-pin connector to plug into the controller. If the old unit has a 9-pin connector then you'll just need an adapter # ACCOLKIT. I've attached a short video below where I'll show you the wire harness and controller. If your old Dometic system had...
view full answer...

Replacement For Leaking Cable-Actuated Black Water Waste Valve
It is likely the correct fix yes, and the replacement cable actuated waste valve you need is the LaSalle Bristol Cable-Actuated RV Waste Valve for Black Water Tank - Spigot to Hub - 36" Cable # 34466N4AB36GM, 48" Cable # 34466N4AB48GMA, or 72" Cable # 34466N4AB72GMA. To install it use LaSalle Bristol ABS Solvent Cement # 3447530889.
view full answer...

Recommended Trailer Hitch Receiver And Electric Bike Rack For 5th Wheel Trailer
I would be happy to recommend a trailer hitch receiver and 5th wheel rated bike rack for your 2019 Prime Time Crusader 5th Wheel Trailer. Starting with the hitch I recommend the Curt Adjustable Width Trailer Hitch Receiver # 13703 as it will fit box frames, C-channel frames, or I-beam frames that are 22"-72" wide. The # 13703 is a Class III receiver that has a 350lb maximum tongue weight rating and 3500lb maximum trailer weight rating making it perfect for carrying a bike rack. You will...
view full answer...

Correct Adapter for 5th Wheel to Gooseneck Conversion with a Recessed Ball
I would be happy to help you and I have a couple of options for you depending on the dimensions of your recessed ball. The first option and the one I would strongly recommend is the Demco Recon Gooseneck-to-5th Wheel Trailer Hitch Adapter for Recessed Ball item # DM8550046 will fit a recessed ball mount if the ball sits no lower than 13/16" from the top of the bed. It has a gross towing weight of 21,000 lbs and a vertical load limit of 5,250 lbs. The other option is the Ranch Hitch Universal...
view full answer...

Lead and Follow Leg Replacement for Crusader 5th Wheel
If you have the Lippert Ground Control 2.0 Electric Leveling System on the Crusader 5th Wheel then you'll need the Replacement Heavy-Duty Landing Gear Jack Leg for Ground Control 2.0 part # LC241846 for 29-1/2" outer tube or part # LC241845 for 33-1/2" outer tube. They will work on either side of the trailer.
view full answer...

Will Monitor of FOS43TASF Connect to old Furrin Camera
Old Furrion cameras are not able to connect to their Vision S monitors so while I know it's not the news you'd like to hear, you would have to replace the system with the Furrion Vision S # FOS43TASF.
view full answer...

How Can Furrion Chill 15k BTU AC Unit Replace Dometic Brisk 2
If you use the Furrion Chill adapter part # C-FACR15SA-A01 you can easily install a Chill AC 15k unit part # FR86PR in place of your Dometic Brisk using the same ducting and electrical connections. This will allow your current thermostat and controls to function with the Chill.
view full answer...

What Size Are Bolts For Ultra-Fab # UF35-946403 Hitch?
I apologize that your bolts were missing. If you prefer I can have them shipped to you. The bolts that come with the Ultra-Fab # UF35-946403 hitch are 3/8" diameter X 16 coarse thread. The bolts only hold the extension arms in place while being welded. After hitch has been welded on the bolts can be removed.
view full answer...